Home > Business Critical Applications, VMware > Storage I/O Control with FAST Auto Tiering Support Statement Conflicts

Storage I/O Control with FAST Auto Tiering Support Statement Conflicts

I’ve been working on a vSphere 5 Architecture Design for business critical applications for a large financial institution and have run into a conflict in the support statement between VMware and EMC with regard to the support of FAST (Fully Automated Storage Tiering) on VMAX when used with Storage I/O Control. The VMware SAN Compatibility Guide on page 6 says “All the storage devices listed on vSphere 4.1 Storage HCL are supported for use with SIOC. There is no special certification requirements for the SIOC support.” This is where things start to get interesting.

If you read the VMware SAN Compatibility Guide you would think that FAST on VMAX with Storage I/O Control was no problem. Further to this VMware KB 1022091 – Troubleshooting Storage I/O Control says “Before using SIOC on datastores that are backed by arrays with automated storage tiering capabilities, check the VMware Compatibility Guide to ensure that your automated tiered storage array is certified to be compatible with SIOC.” So based on the KB if you checked back with the VMware SAN Compatibility Guide you would still think that Storage I/O Control with FAST on VMAX was no problem. But is it?

However if you visit the EMC site and you look up the latest edition (version 7) of the white paper on how to configure and use Symmetrix Storage with vSphere titled Using EMC Symmetrix Storage in VMware vSphere Environments you will find on page 154 a cautionary note saying “Storage I/O Control is not supported on devices whose datastores are managed by EMC FAST.” This is where some head scratching might start.

I can find no explanation for this apparent conflicting support statement between VMware and EMC on this topic. I am also unable to find any definitive statements in a document or KB from VMware that explicitly mentions Storage I/O Control and EMC FAST or the supportability thereof. I am following up with good contacts inside EMC and VMware to see if I can get to the bottom of this. The word from one of the authors of the EMC TechBook is that this is still the current ‘recommendation’ and although there is a new version being released shortly this advice is not changing. Recommendations are one thing and support is another, so I think it’s important to have absolute clarity on this. Especially when Storage DRS may be involved in the future, even in Manual Mode.

So why would I want to use FAST with SIOC in the first place? Firstly to get the best use of storage between the available tiers in use, FC and SSD in this case. Secondly because the customer requirements state that all VM’s are of equal importance and need equal fairness with regard to access to storage. By using Storage I/O Control it will prevent the noisy neighbor problem where one VM will impact the performance of others. Even with FAST in use this should provide fair access to I/O resources for the VM’s that may be sharing a datastore. SIOC should also reduce the impact of momentary spikes of IO latency if these are observed when FAST is migrating blocks between tiers and still ensuring fairness.

Update (less than 24 hours later): Thanks to one of the great team at VMware – Manish Patel a.k.a. @Mandivs I have got a response from one of the EMC TechBook document authors. It turns out that the reference to SIOC not being supported with FAST is incorrect and will be completely removed from the next version of the document, which is due out in a couple of weeks. This is a quote from Cody Hosterman regarding the TechBook note: “This note is incorrect in the Techbook and is being pulled entirely in an upcoming version. It somehow arose from the fact that SIOC would rarely be useful with FAST VP-enabled devices and in a properly configured environment shouldn’t be necessary at all on a VMAX. But there are some extreme situations where it could help so it is supported. Please disregard the note.”

This post first appeared on the Long White Virtual Clouds blog at longwhiteclouds.com, by Michael Webster +. Copyright © 2012 – IT Solutions 2000 Ltd and Michael Webster +. All rights reserved. Not to be reproduced for commercial purposes without written permission.

  1. Brandon
    March 14, 2012 at 9:45 pm

    Mate, your blog is awesome, its funny that you are running into these interesting articles etc, just as I am about to deploy similar configs! Great work!

    I have some good contacts inside EMC over here so Ill see if I can find the correct answer also. Ill point them straight at your blog.


  1. March 15, 2012 at 8:22 am

Leave a Comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

%d bloggers like this: